Buy this Domain

Community Discussions

Explore the latest discussions and community conversations related to this domain.

Point Network Introducing: The Real Web 3.0

Main Post: Point Network Introducing: The Real Web 3.0

Top Comment:

So we have a Fake WEB 3.0. I never knew about them

Forum: r/CryptoCurrency

UniFi Network Application 7.0.23

Main Post: UniFi Network Application 7.0.23

Top Comment:

Using the Upvote/Downvote functionality of Reddit to act as installation case reports seems irresponsible to me for a number of reasons.

First and foremost because it means that if it does turn out to be buggy, that information will get buried since that means the post gets heavily downvoted.

But also, the assumption that everyone is gong to keep reading all the way to the end before upvoting a post like this as useful information is not a good one. Especially when, the post is longer than a full page on a 1080p monitor. And super especially when you've already gotten in to OS specific instructions and checksums before those instructions get there.

Forum: r/UNIFI

Razer Synapse 3.0 "No network connectivity detected

Main Post:

yes i've read a ton of threads here, googled the whole world and it's still not working..

restarted, formatted, reinstalled, switched off my antivirus, firewall, everything..

IT IS STILL SAYING "NO NETWORK CONNECTIVITY DETECTED" jesus help..

AND YES I even changed the xml form in note pad from <mode> Online </mode> to <mode> Offline </mode>

it's still not working.. MY RAZER NOMMO is literally NO MORE T_T I wanna sync my beautiful lightinggggg

help T_T

Top Comment:

Hey zeniaga,

You may try the following steps.

  1. Uninstall the Razer software from your machine by navigating to – Control Panel\All Control Panel Items\Programs and Features.

    Use this link to ensure residue of Synapse is totally removed from your machine: https://www.revouninstaller.com/revo_uninstaller_free_download.html

    Restart your machine.

  2. Update to the newest version

    Disable any anti-virus that may interfere with the installation process.

    Visit http://support.razerzone.com/software

    Select Synapse 3 and reinstall SynapseRun the installer and make sure to click OK/Allow buttons on the UserAccount Control (UAC) prompts.

    Restart your machine and log back into your Razer account allow - to fully update, restarting immediately when prompted.

Please let me know through if following the instructions above fixed your issue or not.

Regards,

Ethel S.

RΛZΞR | SCHICKLETTE

Forum: r/razer

UniFi Network Application 9.0.108

Main Post:

Announcement Post from Ubiquiti

Overview

UniFi Network Application 9.0.108 adds Zone-Based Firewall, CyberSecure, Network Application API, and includes the improvements and bugfixes listed below.

Zone-Based Firewall settings

The new Zone-Based Firewall on UniFi Gateways categorizes different parts of your network into zones and allows for more granular and simplified policy management.

  • Segment your network by using fewer, simpler policies, reducing complexity and increasing visibility.
  • Configure specific policies to govern which traffic can pass between zones, based on Network Objects, IPs, ports, applications, and more.
  • The migration to Zone-Based Firewall is irreversible unless you restore a backup prior to the migration.
  • Existing policies that cannot be migrated to a single zone will be duplicated to multiple pairs.
  • Requires UniFi (Cloud) Gateway firmware version 4.1 or newer.
  • See the Zone-Based Firewall and Migrating to Zone-Based Firewalls Help Center articles for more information.

CyberSecure by ProofPoint

CyberSecure is an optional extension of our Intrusion Detection and Prevention (IPS/IDS) system, enhancing IPS/IDS with signatures from ProofPoint's expert security researchers. It is available as an optional per-site subscription. It is available for all UniFi (Cloud) Gateways besides the Express and UXG-Lite. Please note that our existing IPS/IDS remains free.

  • Requires UniFi Cloud Gateway 4.1.8/UniFi Gateway 4.1.3 and newer.
  • See the CyberSecure Help Center article for more information.

Network Application API

The API provides powerful tools to manage Sites, Devices, and Clients, offering access to detailed configuration, real-time status, and live statistics. It supports insights for WiFi, Wired, and VPN clients, including connection details.

  • Available through Control Plane > Integrations.
  • Requires a Cloud Gateway with UniFi OS 4.1.9 or newer.
  • Next versions will include more data, so leave comments on what you would like to see.

Improvements

  • Added support for re-ordering the Dashboard widgets.
  • Added the ability to Locate or Restart devices from the Device table when hovering.
  • Added the ability to edit VLANs in the Port Manager > VLAN page.
  • Added support for MongoDB 8.0 and Java 21 on Network Servers.
  • Added Source name in the Intrusion Prevention email notifications.
  • Added support for ed25519 SSH Keys for Device Authentication.
  • Added WiFi Band column in the WiFi Settings table.
  • Added support for third-party networks in IP and MAC ACLs.
  • Added warning when configuring a Site-to-Site VPN with overlapping subnets.
  • Added QoS in the Routing section within Settings.
  • Requires the new Zone-Based Firewall.
  • Added support for Override WAN Monitors in the BGP Configuration.
  • Requires UniFi Cloud Gateway 4.1.7/UniFi Gateway 4.1.3 or newer.
  • Added support for Link Aggregation on the EFG and UXG-Enterprise.
  • Requires UniFi Cloud Gateway 4.1.8/UniFi Gateway 4.1.3 or newer.
  • Allow duplicate remote IP addresses when using different WANs on Route-Based IPsec Site-to-Site VPNs.
  • Improved the Threat System Log user experience.
  • Improved the System Logs searching resiliency.
  • Improved the Honeypot user experience.
  • Improved the Port Forwarding user experience.
  • Improved the Client page user experience on large setups.
  • Improved the WAN Packet Capture user experience.
  • Improved the Security Settings user experience.
  • Improved the Intrusion Prevention Active Detections Categories.
  • Improved the Radio Manager user experience.
  • Improved the Dashboard loading latency.
  • Improved the port warnings in Port Manager.
  • Improved filtering on the Devices page.
  • Improved Statistics accuracy for Internet Activity in the Dashboard and Traffic Statistics.
  • Improved the Airtime scanning user experience.
  • Improved the WiFi Connectivity page user experience.
  • Automatically turn off wireless meshing if a device is adopted via a wired connection.
  • Increased default channel width to 80MHz for the 5GHz radio.
  • Moved Firewall Connection Tracking settings to the NAT section.
  • Moved the Traffic and Device Identification settings to System > Advanced.
  • Renamed DNS Shield to Encrypted DNS.
  • Renamed Country Restrictions to Region Blocking.

Bugfixes

  • Fixed an issue where NAT rules sometimes didn't work on the UXG-Lite.
  • Fixed incorrect timezone for Network Application Activity Logging to SIEM Servers.
  • Fixed invalid mixed speed warning on ECS-Aggregation switches.
  • Fixed an issue where the Network Application changelogs were missing on fresh Network Server installations.
  • Fixed an issue where the last known uplink could be missing if it was a mesh uplink.

Additional information

  • Create a backup before upgrading your UniFi Network Application in the event any issues are encountered.
  • See the UniFi Network Server Help Center article for more information on self-hosting a server.
  • UniFi Network Application 7.5 and newer requires MongoDB 3.6 and Java 17.
  • Version 7.5 to 8.0 supports up to MongoDB 4.4.
  • Version 8.1 and newer supports up to MongoDB 7.0.
  • Version 9.0 and newer supports up to MongoDB 8.0 and Java 17/21.
  • UniFi Network Application updates may cause your adopted devices to be re-provisioned.
  • Existing UniFi Network Applications must be on one of the following versions to upgrade directly to this version: 9.0.108 and earlier 9.0.x versions. 8.6.9 and earlier 8.6.x versions. 8.5.6 and earlier 8.5.x versions. 8.4.62 and earlier 8.4.x versions. 8.3.32 and earlier 8.3.x versions. 8.2.93 and earlier 8.2.x versions. 8.1.127 and earlier 8.1.x versions. 8.0.28 and earlier 8.0.x versions. 7.5.187 and earlier 7.5.x versions. 7.4.162 and earlier 7.4.x versions. 7.3.84 and earlier 7.3.x versions. 7.2.97 and earlier 7.2.x versions. 7.1.68 and earlier 7.1.x versions. 7.0.26 and earlier 7.0.x versions. 6.5.55 and earlier 6.5.x versions. 6.4.54 and earlier 6.4.x versions. 6.3.51 and earlier 6.3.x versions. 6.2.26 and earlier 6.2.x versions. 6.1.71 and earlier 6.1.x versions. 6.0.45 and earlier 6.0.x versions. 5.14.25 and earlier 5.14.x versions. 5.13.33 and earlier 5.13.x versions. 5.12.72 and earlier 5.12.x versions. 5.11.52 and earlier 5.11.x versions. 5.10.27 and earlier 5.10.x versions. 5.9.33 and earlier 5.9.x versions. 5.8.30 and earlier 5.8.x versions. 5.7.28 and earlier 5.7.x versions. 5.6.42 and earlier 5.6.x versions. Most earlier versions are also supported for a direct upgrade, going back to 3.1.0.

UniFi Network Native Application for UniFi OS

A specific application version that is only compatible with the UDM, UDR, Express, UCG-Ultra and UCG-Max (running UniFi OS 3.1.6 or newer).

  • The UniFi OS update uses the application version that is required for your console.
  • The manual update process via SSH requires you to use the compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (before UniFi OS 3.1.6) on the UDM and UDR still use regular UniFi Network Application for UniFi OS.

Checksums

fb6176096443de6bdbe326e883b77586 *UniFi-installer.exe d272d1cada1e72ad17c75be7575e7792 *UniFi-Network-Server.dmg bf598231afe64f4318172c4d6f24a743 *UniFi.unix.zip ff6bf33e3567effac2f63adf2b9358eb *unifi_sysvinit_all.deb 6e0c18fd5c2cba8c2eb14467d87318f2 *unifi-uos_sysvinit.deb 93883b8f88207caec254c795ff995e88 *unifi-native_sysvinit.deb 601df32736f41e40a80a3e472450a3e1 *unifi_sh_api ------------------------------------------------------------------------------------------------------------------------ SHA256(UniFi-installer.exe)= 8ef2bfd22075a171c170811bb996c8852a95bddb7fdcc53fd0aaf677711d134f SHA256(UniFi-Network-Server.dmg)= 3fc61f889168c3ee690937b14af9a1641fa4c9f3b72b837c67abe6dc00786d1e SHA256(UniFi.unix.zip)= 6585b8dd9707dee9ea8954a089bdf3ba5dfd43f7168c062cf87a2d1c8badd602 SHA256(unifi_sysvinit_all.deb)= a7eb785bc991f82b6649766ac693f5539e621e12b3eec5dc2f73eefb4a5e36b5 SHA256(unifi-uos_sysvinit.deb)= 6d8c3691838ca30430f697c08135e25ce032bb7ecb96620f3feb5954c2b7b084 SHA256(unifi-native_sysvinit.deb)= 42d4dda8c2e37a424d158ac6c32913cd16c7eeeec585d3922b18b8cfbaacddd7 SHA256(unifi_sh_api)= 1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb

Would you recommend this release?

  • Upvote this post if you recommend this version
    • If you'd like, leave a comment about your setup so others can upgrade with confidence
  • Downvote this post if you experienced significant issues with it
    • Leave a comment (or upvote an existing one) about the issues
    • If you have a workaround, please share here
    • Remember to file bugs with Ubiquiti

Top Comment: Looks like a solid update!

Forum: r/Ubiquiti

Happiness has a name, and it's called "Network 9.0"

Main Post: Happiness has a name, and it's called "Network 9.0"

Top Comment:

Dark mode.

Forum: r/Ubiquiti

UniFi Network Application 9.0.108

Main Post:

Announcement Post from Ubiquiti

Overview

UniFi Network Application 9.0.108 adds Zone-Based Firewall, CyberSecure, Network Application API, and includes the improvements and bugfixes listed below.

Zone-Based Firewall settings

The new Zone-Based Firewall on UniFi Gateways categorizes different parts of your network into zones and allows for more granular and simplified policy management.

  • Segment your network by using fewer, simpler policies, reducing complexity and increasing visibility.
  • Configure specific policies to govern which traffic can pass between zones, based on Network Objects, IPs, ports, applications, and more.
  • The migration to Zone-Based Firewall is irreversible unless you restore a backup prior to the migration.
  • Existing policies that cannot be migrated to a single zone will be duplicated to multiple pairs.
  • Requires UniFi (Cloud) Gateway firmware version 4.1 or newer.
  • See the Zone-Based Firewall and Migrating to Zone-Based Firewalls Help Center articles for more information.

CyberSecure by ProofPoint

CyberSecure is an optional extension of our Intrusion Detection and Prevention (IPS/IDS) system, enhancing IPS/IDS with signatures from ProofPoint's expert security researchers. It is available as an optional per-site subscription. It is available for all UniFi (Cloud) Gateways besides the Express and UXG-Lite. Please note that our existing IPS/IDS remains free.

  • Requires UniFi Cloud Gateway 4.1.8/UniFi Gateway 4.1.3 and newer.
  • See the CyberSecure Help Center article for more information.

Network Application API

The API provides powerful tools to manage Sites, Devices, and Clients, offering access to detailed configuration, real-time status, and live statistics. It supports insights for WiFi, Wired, and VPN clients, including connection details.

  • Available through Control Plane > Integrations.
  • Requires a Cloud Gateway with UniFi OS 4.1.9 or newer.
  • Next versions will include more data, so leave comments on what you would like to see.

Improvements

  • Added support for re-ordering the Dashboard widgets.
  • Added the ability to Locate or Restart devices from the Device table when hovering.
  • Added the ability to edit VLANs in the Port Manager > VLAN page.
  • Added support for MongoDB 8.0 and Java 21 on Network Servers.
  • Added Source name in the Intrusion Prevention email notifications.
  • Added support for ed25519 SSH Keys for Device Authentication.
  • Added WiFi Band column in the WiFi Settings table.
  • Added support for third-party networks in IP and MAC ACLs.
  • Added warning when configuring a Site-to-Site VPN with overlapping subnets.
  • Added QoS in the Routing section within Settings.
  • Requires the new Zone-Based Firewall.
  • Added support for Override WAN Monitors in the BGP Configuration.
  • Requires UniFi Cloud Gateway 4.1.7/UniFi Gateway 4.1.3 or newer.
  • Added support for Link Aggregation on the EFG and UXG-Enterprise.
  • Requires UniFi Cloud Gateway 4.1.8/UniFi Gateway 4.1.3 or newer.
  • Allow duplicate remote IP addresses when using different WANs on Route-Based IPsec Site-to-Site VPNs.
  • Improved the Threat System Log user experience.
  • Improved the System Logs searching resiliency.
  • Improved the Honeypot user experience.
  • Improved the Port Forwarding user experience.
  • Improved the Client page user experience on large setups.
  • Improved the WAN Packet Capture user experience.
  • Improved the Security Settings user experience.
  • Improved the Intrusion Prevention Active Detections Categories.
  • Improved the Radio Manager user experience.
  • Improved the Dashboard loading latency.
  • Improved the port warnings in Port Manager.
  • Improved filtering on the Devices page.
  • Improved Statistics accuracy for Internet Activity in the Dashboard and Traffic Statistics.
  • Improved the Airtime scanning user experience.
  • Improved the WiFi Connectivity page user experience.
  • Automatically turn off wireless meshing if a device is adopted via a wired connection.
  • Increased default channel width to 80MHz for the 5GHz radio.
  • Moved Firewall Connection Tracking settings to the NAT section.
  • Moved the Traffic and Device Identification settings to System > Advanced.
  • Renamed DNS Shield to Encrypted DNS.
  • Renamed Country Restrictions to Region Blocking.

Bugfixes

  • Fixed an issue where NAT rules sometimes didn't work on the UXG-Lite.
  • Fixed incorrect timezone for Network Application Activity Logging to SIEM Servers.
  • Fixed invalid mixed speed warning on ECS-Aggregation switches.
  • Fixed an issue where the Network Application changelogs were missing on fresh Network Server installations.
  • Fixed an issue where the last known uplink could be missing if it was a mesh uplink.

Additional information

  • Create a backup before upgrading your UniFi Network Application in the event any issues are encountered.
  • See the UniFi Network Server Help Center article for more information on self-hosting a server.
  • UniFi Network Application 7.5 and newer requires MongoDB 3.6 and Java 17.
  • Version 7.5 to 8.0 supports up to MongoDB 4.4.
  • Version 8.1 and newer supports up to MongoDB 7.0.
  • Version 9.0 and newer supports up to MongoDB 8.0 and Java 17/21.
  • UniFi Network Application updates may cause your adopted devices to be re-provisioned.
  • Existing UniFi Network Applications must be on one of the following versions to upgrade directly to this version: 9.0.108 and earlier 9.0.x versions. 8.6.9 and earlier 8.6.x versions. 8.5.6 and earlier 8.5.x versions. 8.4.62 and earlier 8.4.x versions. 8.3.32 and earlier 8.3.x versions. 8.2.93 and earlier 8.2.x versions. 8.1.127 and earlier 8.1.x versions. 8.0.28 and earlier 8.0.x versions. 7.5.187 and earlier 7.5.x versions. 7.4.162 and earlier 7.4.x versions. 7.3.84 and earlier 7.3.x versions. 7.2.97 and earlier 7.2.x versions. 7.1.68 and earlier 7.1.x versions. 7.0.26 and earlier 7.0.x versions. 6.5.55 and earlier 6.5.x versions. 6.4.54 and earlier 6.4.x versions. 6.3.51 and earlier 6.3.x versions. 6.2.26 and earlier 6.2.x versions. 6.1.71 and earlier 6.1.x versions. 6.0.45 and earlier 6.0.x versions. 5.14.25 and earlier 5.14.x versions. 5.13.33 and earlier 5.13.x versions. 5.12.72 and earlier 5.12.x versions. 5.11.52 and earlier 5.11.x versions. 5.10.27 and earlier 5.10.x versions. 5.9.33 and earlier 5.9.x versions. 5.8.30 and earlier 5.8.x versions. 5.7.28 and earlier 5.7.x versions. 5.6.42 and earlier 5.6.x versions. Most earlier versions are also supported for a direct upgrade, going back to 3.1.0.

UniFi Network Native Application for UniFi OS

A specific application version that is only compatible with the UDM, UDR, Express, UCG-Ultra and UCG-Max (running UniFi OS 3.1.6 or newer).

  • The UniFi OS update uses the application version that is required for your console.
  • The manual update process via SSH requires you to use the compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (before UniFi OS 3.1.6) on the UDM and UDR still use regular UniFi Network Application for UniFi OS.

Checksums

fb6176096443de6bdbe326e883b77586 *UniFi-installer.exe d272d1cada1e72ad17c75be7575e7792 *UniFi-Network-Server.dmg bf598231afe64f4318172c4d6f24a743 *UniFi.unix.zip ff6bf33e3567effac2f63adf2b9358eb *unifi_sysvinit_all.deb 6e0c18fd5c2cba8c2eb14467d87318f2 *unifi-uos_sysvinit.deb 93883b8f88207caec254c795ff995e88 *unifi-native_sysvinit.deb 601df32736f41e40a80a3e472450a3e1 *unifi_sh_api ------------------------------------------------------------------------------------------------------------------------ SHA256(UniFi-installer.exe)= 8ef2bfd22075a171c170811bb996c8852a95bddb7fdcc53fd0aaf677711d134f SHA256(UniFi-Network-Server.dmg)= 3fc61f889168c3ee690937b14af9a1641fa4c9f3b72b837c67abe6dc00786d1e SHA256(UniFi.unix.zip)= 6585b8dd9707dee9ea8954a089bdf3ba5dfd43f7168c062cf87a2d1c8badd602 SHA256(unifi_sysvinit_all.deb)= a7eb785bc991f82b6649766ac693f5539e621e12b3eec5dc2f73eefb4a5e36b5 SHA256(unifi-uos_sysvinit.deb)= 6d8c3691838ca30430f697c08135e25ce032bb7ecb96620f3feb5954c2b7b084 SHA256(unifi-native_sysvinit.deb)= 42d4dda8c2e37a424d158ac6c32913cd16c7eeeec585d3922b18b8cfbaacddd7 SHA256(unifi_sh_api)= 1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb

Would you recommend this release?

  • Upvote this post if you recommend this version
    • If you'd like, leave a comment about your setup so others can upgrade with confidence
  • Downvote this post if you experienced significant issues with it
    • Leave a comment (or upvote an existing one) about the issues
    • If you have a workaround, please share here
    • Remember to file bugs with Ubiquiti

Top Comment:

Ooh la la. New firewalls sound cool

Forum: r/UNIFI

Unifi 9.0!!!

Main Post: Unifi 9.0!!!

Top Comment: How is this different from using IP Groups and defining ports and networks?

Forum: r/UNIFI

UniFi Network Application 9.0.114

Main Post:

Announcement Post from Ubiquiti

Overview

UniFi Network Application 9.0.114 includes the improvements and bugfixes listed below.

Improvements

  • Added notice regarding WPA3 encryption when enabling MLO.
  • Improved memory usage in specific environments.
  • Improved Route distribution behavior for SD-WAN Hub & Spoke.
  • Improved the default Guest Hotspot Policies for Zone-Based Firewall.
  • Improved the Policy Based Routes behavior when users pause VPN Clients.
  • It will now act the same as when the VPN Client is down.
  • Improved backup restore from sites using Zone-Based Firewall on Sites that don't have a gateway adopted.
  • Updated the order of Default Policies in Zone-Based Firewall.
  • "Allow Return Traffic" is now positioned before Network Isolation.

Bugfixes

  • Fixed an issue where U-LTE failover didn't work after readopting the device.
  • Fixed an issue where incorrect sources were listed for incoming threats.
  • Fixed an issue where SD-WAN Hub & Spoke setups could have DNS storms in rare cases.
  • Fixed the inability to delete sites on multi-site setups.
  • Fixed NetFlow networks not updating after deleting VLANs.
  • Fixed an issue where Tagged VLAN management "Allow All" didn't work correctly on In-Wall APs.
  • Fixed the inability to create Firewall rules with a MAC address as the Source in rare cases.
  • Fixed the inability to edit Networks in rare cases.
  • Fixed an issue where SD-WAN Site Magic was incorrectly showing internal VPN tunnels.
  • Fixed an issue where the Free Trial option for Payment authentication didn't work for Guest Hotspots.
  • Fixed an issue where L3 Static Routes weren't working in rare cases.
  • Fixed an issue where IP ACLs without specified ports weren't working.
  • Fixed an issue where saving changes in Radio Manager could fail in rare cases.
  • Fixed an issue where the WireGuard VPN config file didn't work with the latest Windows update.
  • Fixed an issue where the InterVLAN network for L3 Switches was not placed in the Internal Zone for Zone-Based Firewall.
  • Fixed an issue where users could configure MLO with Open Security.

Additional information

  • Create a backup before upgrading your UniFi Network Application if any issues are encountered.
  • See the UniFi Network Server Help Center article for more information on self-hosting a server.
  • UniFi Network Application 7.5 and newer requires MongoDB 3.6 and Java 17.
  • Version 7.5 to 8.0 supports up to MongoDB 4.4.
  • Version 8.1 and newer supports up to MongoDB 7.0.
  • Version 9.0 and newer supports up to MongoDB 8.0 and Java 17/21.
  • UniFi Network Application updates may cause your adopted devices to be re-provisioned.
  • Existing UniFi Network Applications must be on one of the following versions to upgrade directly to this version: 9.0.114 and earlier 9.0.x versions. 8.6.9 and earlier 8.6.x versions. 8.5.6 and earlier 8.5.x versions. 8.4.62 and earlier 8.4.x versions. 8.3.32 and earlier 8.3.x versions. 8.2.93 and earlier 8.2.x versions. 8.1.127 and earlier 8.1.x versions. 8.0.28 and earlier 8.0.x versions. 7.5.187 and earlier 7.5.x versions. 7.4.162 and earlier 7.4.x versions. 7.3.84 and earlier 7.3.x versions. 7.2.97 and earlier 7.2.x versions. 7.1.68 and earlier 7.1.x versions. 7.0.26 and earlier 7.0.x versions. 6.5.55 and earlier 6.5.x versions. 6.4.54 and earlier 6.4.x versions. 6.3.51 and earlier 6.3.x versions. 6.2.26 and earlier 6.2.x versions. 6.1.71 and earlier 6.1.x versions. 6.0.45 and earlier 6.0.x versions. 5.14.25 and earlier 5.14.x versions. 5.13.33 and earlier 5.13.x versions. 5.12.72 and earlier 5.12.x versions. 5.11.52 and earlier 5.11.x versions. 5.10.27 and earlier 5.10.x versions. 5.9.33 and earlier 5.9.x versions. 5.8.30 and earlier 5.8.x versions. 5.7.28 and earlier 5.7.x versions. 5.6.42 and earlier 5.6.x versions. Most earlier versions are also supported for a direct upgrade, going back to 3.1.0.

UniFi Network Native Application for UniFi OS

A specific application version that is only compatible with the UDM, UDR, Express, UCG-Ultra, and UCG-Max (running UniFi OS 3.1.6 or newer).

  • The UniFi OS update uses the application version required for your console.
  • The manual update process via SSH requires you to use the compatible package. Incompatible packages will be rejected on installation.
  • Older UniFi OS versions (before UniFi OS 3.1.6) on the UDM and UDR still use regular UniFi Network Application for UniFi OS.

Checksums

a36bfdd5ae678eb51246910c6fe36e63 *UniFi-installer.exe e52a5ff6f3a240fae9ce910ede0fb24b *UniFi-Network-Server.dmg 08d75ed06aaa5196fcb43522eb0eee17 *UniFi.unix.zip 180253c2479cabcf1776aef2e65b8810 *unifi_sysvinit_all.deb 71e30685822c99ab38aace49e20a331a *unifi-uos_sysvinit.deb 9aa8afea2e5be0f2c08768081272d0a8 *unifi-native_sysvinit.deb 601df32736f41e40a80a3e472450a3e1 *unifi_sh_api ------------------------------------------------------------------------------------------------------------------------ SHA256(UniFi-installer.exe)= 2b5bc8935386cd3f060a0d8c0387e48c85d8866f002e744a6e36a09b9cc6176b SHA256(UniFi-Network-Server.dmg)= 541cb18e993e961330a793aff5b9590af4b16fe513a49e6acf03a3ee4a7c5da6 SHA256(UniFi.unix.zip)= e34c28a430fb2b36cb1be70b78a52109d1bf559f64ae02f38c341e5c620f6787 SHA256(unifi_sysvinit_all.deb)= df1ba6208cebfadc7ad243e13df4acd8acf6889dfd2ade7ddf855c6bf32952ee SHA256(unifi-uos_sysvinit.deb)= 64574992a1cad7628185c57727bcb806355f76cd7b6ff49f179f77f0fbc0628e SHA256(unifi-native_sysvinit.deb)= 1b0e2a7998320b5587331e42e29ecda5e0bf8dc137b345bdb451e720e9656962 SHA256(unifi_sh_api)= 1791685039ea795970bcc7a61eec854058e3e6fc13c52770e31e20f3beb622eb

Would you recommend this release?

  • Upvote this post if you recommend this version
    • If you'd like, leave a comment about your setup so others can upgrade with confidence
  • Downvote this post if you experienced significant issues with it
    • Leave a comment (or upvote an existing one) about the issues
    • If you have a workaround, please share here
    • Remember to file bugs with Ubiquiti

Top Comment: Hello! Thanks for posting on r/Ubiquiti ! This subreddit is here to provide unofficial technical support to people who use or want to dive into the world of Ubiquiti products. If you haven’t already been descriptive in your post, please take the time to edit it and add as many useful details as you can. Ubiquiti makes a great tool to help with figuring out where to place your access points and other network design questions located at: https://design.ui.com If you see people spreading misinformation or violating the "don't be an asshole" general rule, please report it! I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

Forum: r/Ubiquiti

Unifi - Upcoming 9.0 Adds Support for Zone-Based Firewall (ZBF)

Main Post: Unifi - Upcoming 9.0 Adds Support for Zone-Based Firewall (ZBF)

Top Comment: Unifi's upcoming release adds support for zone-based firewalls. https://community.ui.com/releases/UniFi-Network-Application-9-0-108 The GUI, looks extremely usable, and is a massive improvement for anyone who manages lots of VLANs. I am busy upgrading to the beta right now. This looks like a massive improvement over the current firewall GUI. Edit- Note- if you want to use this- you will need to opt-into early access firmware updates, and update your gateway to 4.1

Forum: r/homelab